Mackie 1640 Owner's Manual download pdf (Page 45)

Owner's Manual 45

USING THE ONYX 1640i WITH A MAC

The Onyx 1640i works with Mac OS 10.4.11 and higher.

This OS includes the Apple FireWire 2.0 driver. The

Onyx 1640i will only work with the 2.0 driver, so if you

have an OS before 10.4.11, you will need to check your

system for updates from the nice folks at Apple.

1. Connect a FireWire cable from your Onyx 1640i

to a FireWire port on your Mac.

2. Turn on your Onyx 1640i.

3. Go to the applications folder, open the utilities

folder, and double-click “Audio MIDI Setup.”

4. Click the Audio Devices tab, and select

Onyx i in the “Properties For” drop-down box.

5. Here you can see the settings for the mixer.

You can also choose it as your default input or

output, as well as designate it to be used for

system sound output. There are 16 channels of

audio input from the Onyx 1640i, and

2 channels of audio output to the Onyx 1640i.

6. The Sample Rate is also shown from 44.1 kHz,

48 kHz, 88.2 kHz and 96 kHz.

7. You’re ready to go with any Mac OS X Core

Audio host application (i.e., Tracktion, Logic,

Cubase, Nuendo, Live, Digital Performer, etc.).

8. In your audio software applications, select and

activate the inputs from the mixer and outputs

to the mixer.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50

No comments

Mackie 1640 Owner's Manual Page 45