Mackie PPM608 User Manual download pdf (Page 27)

Owner’s Manual

Appendix C: Technical Information

Speciﬁcations

Distortion (THD + N)

(1 kHz, 30 kHz bandwidth)

Mic mono: <0.005% / <0.007%

Line mono: <0.005%

Line stereo: <0.01% at main out

Main mix output noise

(1 kHz, 30 kHz bandwidth)

Main mix level down, all channel levels down: –95 dBu

Main mix level 0 dB, all channel levels down: –86 dBu

Main mix level 0 dB, all channel levels 0 dB: –77 dBu

Frequency Response

(+0 dB / –3 dB)

Mic mono input: < 10 Hz – 80 kHz

Line mono inputs: < 10 Hz – 40 kHz

Line stereo inputs: < 10 Hz – 75 kHz

Equivalent Input Noise (EIN)

Mic input (20 Hz – 20 kHz)

150 Ω termination: –128 dBu

Gain

Mic mono input: 25 dB / 45 dB

Line mono inputs: 0 dB / 20 dB

Line stereo inputs: 0 dB

Maximum Levels

Mic mono input: –5 / –25 dBu

Line mono inputs: +21 / +1 dBu

Line stereo inputs: +21 dBu

Preamp main and monitor outputs: +21 dBu

Impedances

Mic mono input: 3.6 kΩ balanced

Line mono input: 20 kΩ balanced

Line mono input, Ch 5, 6 Hi-Z: 500 kΩ unbalanced

Main and monitor preamp outputs: 240 Ω balanced

120 Ω unbalanced

Channel EQ

High Shelving: ±15 dB @ 12 kHz

Mid Peaking: ±15 dB @ 2.5 kHz

Low Shelving: ±15 dB @ 80 Hz

7-Band Graphic EQ

Main and Monitor 1: ±15 dB @

125, 250, 500, 1k, 2k,

4k, and 8 kHz

Connections

Mic input: XLR balanced

Line mono input: 1/4" TRS balanced

Line stereo input: 1/4" TRS unbalanced

Preamp main outputs: 1/4" TRS balanced

Monitor outputs: 1/4" TRS balanced

Inserts: 1/4" TRS unbalanced

Loudspeaker outputs: 1/4" TS and Neutrik

Speakon

Loudspeaker outputs

(Both channels loaded and driven at 1 kHz.)

Peak output power @ 4 ohms: 2 x 500 W peak

RMS output power @ 4 ohms: 2 x 250 W rms, 1% THD

2 x 300 W rms, 3% THD

RMS output power @ 8 ohms: 2 x 150 W rms, 1% THD

2 x 180 W rms, 3% THD

Recommended load impedance: 4 – 8 Ω per channel

Digital Effects

Processor: 32-bit

I/O: Mono input /

Stereo output

Number of presets: 24

Power Consumption

US: 100 – 120 VAC,

50 – 60 Hz, 160 watts

EU: 200 – 240 VAC,

50 – 60 Hz, 160 watts

AC Connector: 3-pin IEC 250 VAC

Dimensions

Height: 12.3 in / 314 mm

Width: 19.3 in / 490 mm

Depth: 11.4 in / 290 mm

Net weight: 24.8 lb / 11.2 kg

LOUD Technologies Inc. is always striving to improve our prod-

ucts by incorporating new and improved materials, components,

and manufacturing methods. Therefore, we reserve the right to

change these speciﬁcations at any time without notice.

“Mackie,” and the “Running Man” are registered trademarks

of LOUD Technologies Inc. All other brand names mentioned

are trademarks or registered trademarks of their respective

holders, and are hereby acknowledged.

Please check our website in case there are any corrections and

updates to this manual: www.mackie.com.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Mackie PPM608 User Manual Page 27

Comments to this Manuals

Related products and manuals for Musical Instruments Mackie PPM608