Mackie MR5mk3 Owner's Manual download pdf (Page 12)

MR5mk3 / MR6mk3 / MR8mk3

Appendix C: Technical Information

AC Power Requirements

US: 120 VAC, 60 Hz

Europe: 240 VAC, 50 Hz

Korea: 220 VAC, 60 Hz

Japan: 100 VAC, 50/60 Hz

Note: MRmk3 monitors do not support multiple voltage

conﬁgurations. Make sure the voltage rating for your particular

model (as indicated on the rear panel near the IEC socket)

corresponds with your local AC mains voltage.

AC Connector: 3-pin IEC 250 VAC, 16 A male

Fuse: 115 VAC: T 1 AL / 250 V

230 VAC: T 500 mAL / 250 V [MR5mk3]

115 VAC: T 1.25 AL / 250 V

230 VAC: T 625 mAL / 250 V [MR6mk3]

115 VAC: T 2 AL / 250 V

230 VAC: T 1 AL / 250 V [MR8mk3]

Power Consumption:

90 watts with music, loud mix

7 watts quiescent (idle) [MR5mk3]

120 watts with music, loud mix

7 watts quiescent (idle) [MR6mk3]

150 watts with music, loud mix

10 watts quiescent (idle) [MR8mk3]

Physical Dimensions and Weight

MR5mk3:

Enclosure:

0.47 in / 12 mm thick MDF with

0.98 in / 25 mm MDF front panel

Dimensions:

Height: 11.3 in / 286 mm

Width: 7.8 in / 197 mm

Depth: 10.9 in / 276 mm

Weight: 12.1 lb / 5.5 kg

MR6mk3:

Enclosure:

0.47 in / 12 mm thick MDF with

0.98 in / 25 mm MDF front panel

Dimensions:

Height: 12.7 in / 323 mm

Width: 8.7 in / 222 mm

Depth: 12 in / 305 mm

Weight: 15.9 lb / 7.2 kg

MR8mk3:

Enclosure:

0.59 in / 15 mm thick MDF with

0.98 in / 25 mm MDF front panel

Dimensions:

Height: 15.8 in / 400 mm

Width: 10.9 in / 277 mm

Depth: 13.2 in / 336 mm

Weight: 23.8 lb / 10.8 kg

Damping: Adiabatic batting [MR5/6/8mk3]

Disclaimer

LOUD Technologies is always striving to improve our products

by incorporating new and improved materials, components and

manufacturing methods. Therefore, we reserve the right to

change these speciﬁcations at any time without notice.

MRmk3 Speciﬁcations

Acoustic Performance

Frequency Response (-3 dB):

57 Hz – 20 kHz [MR5mk3]

46 Hz – 20 kHz [MR6mk3]

38 Hz – 20 kHz [MR8mk3]

Frequency Response (-10 dB):

45 Hz – 20 kHz [MR5mk3]

38 Hz – 20 kHz [MR6mk3]

35 Hz – 20 kHz [MR8mk3]

Sound Pressure Level @ 1 meter, +4 dBu into Balanced Input:

102 dB SPL @ 1m [MR5mk3]

105 dB SPL @ 1m [MR6mk3]

107 dB SPL @ 1m [MR8mk3]

Maximum SPL Per Pair: 108 dB SPL @ 1m [MR5mk3]

111 dB SPL @ 1m [MR6mk3]

113 dB SPL @ 1m [MR8mk3]

Transducers

Low Frequency: 5.25 in / 133 mm hyperbolic

curved cone woofer [MR5mk3]

6.5 in / 165 mm hyperbolic

curved cone woofer [MR6mk3]

8.0 in / 203 mm hyperbolic

curved cone woofer [MR8mk3]

High Frequency: Neodymium magnet driven

1 in / 25 mm silk dome tweeter

Ampliﬁers

Low Frequency Power: 30 watts, 4 Ω load,

60 watts peak [MR5mk3]

40 watts, 4 Ω load,

80 watts peak [MR6mk3]

55 watts, 4 Ω load,

110 watts peak [MR8mk3]

High Frequency Power: 20 watts, 8 Ω load,

40 watts peak [MR5mk3]

25 watts, 8 Ω load,

50 watts peak [MR6mk3]

30 watts, 8 Ω load,

60 watts peak [MR8mk3]

Type: Monolithic IC, Class AB with

DMOS power stage

Electronic Crossover

Crossover Type: 24 dB/octave

Crossover Frequency: 3 kHz [MR5mk3]

3.25 kHz [MR6mk3]

3 kHz [MR8mk3]

Sensitivity: +4 dBu at 300 Hz for full output

Input Impedance: 20 kΩ, balanced bridging;

10 kΩ unbalanced

Equalization

Low Frequency EQ: +2 dB/+4 dB @ 100 Hz, shelving

High Frequency EQ: ±2 dB @ 3 kHz, shelving [MR5mk3]

±2 dB @ 3.25 kHz, shelving [MR6mk3]

±2 dB @ 3 kHz, shelving [MR8mk3]

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Mackie MR5mk3 Owner's Manual Page 12

Comments to this Manuals

Related products and manuals for Supplementary music equipment Mackie MR5mk3