Mackie Thump 15 Owner's Manual download pdf (Page 8)

LEVEL

+15-15

600

8k100

MAX

FREQ

HIGH

12kHz

LOW

80Hz

MID

THRU

CONTOUR EQ

INPUT

POWER

OFF

Mackie TH-15A Features

REAR PANEL DESCRIPTION

3. LEVEL

The LEVEL control adjusts the overall signal level at

the input to the built-in power ampliﬁers. It ranges from

Off (

) to MAX (maximum gain), with unity gain at the

center position (12 o’clock).

• TheTH-15Aisdesignedtooperatewitha+4

dBu signal when the LEVEL control is at the U

(center) position.

• TheTH-15Acanacceptuptoa+20dBusignal

by turning down the LEVEL control accordingly.

Turning the LEVEL past unity will provide enough

gain to connect a microphone directly.

• NEVERconnecttheoutputofanamplierdirectly

to the input of the TH-15A. This could damage the

active input circuitry of the loudspeaker.

This is where you connect AC power and your

signal to the loudspeaker and make adjustments to

the frequency response of the speaker to match the

loudspeaker’s location and your room’s environment.

1. INPUT

This is a female XLR-type connector that accepts a

balanced mic or line-level signal from a mixing console

or other signal source. For small gigs, simply connect a

microphone directly and adjust the LEVEL accordingly.

2. THRU

This is a male XLR-type connector that produces

exactly the same signal that is connected to the input

jack. Use it to daisy-chain several TH-15A’s together off

the same signal source.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 16 17

Comments to this Manuals

No comments

Mackie Thump 15 Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Supplementary music equipment Mackie Thump 15