QUICK-START GUIDEX.200
10X.200Digital X Bus9. Connect the Left and Right Speaker Outs (A) from the Mix Out card to the inputs of your ste-reo power amplifi er (or powered mon
11Quick-Start GuideQuick-Start Guide21. In the Reverb panel, click the Src L drop-down box and select Channel Post Insert > Ch. 1 Post. This place
12X.200Digital X BusHookup DiagramsOne of the primary applications for the X.200 is multitrack recording. This involves tracking and monitoring, bounc
13Quick-Start GuideQuick-Start GuideWORDCLOCKSYNC CARDINOUTINOUTSMPTEABMIX OUT CARDSPDIFSPEAKERSPHONESMIX OUTINOUTINLR12LRLROUTAES/EBUDIGITAL CARDOPTI
14X.200Digital X BusWORDCLOCKSYNC CARDINOUTINOUTSMPTEABMIX OUT CARDSPDIFSPEAKERSPHONESMIX OUTINOUTINLR12LRLROUTAES/EBUDIGITAL CARDOPTICALTDIFI/OIN AIN
15Quick-Start GuideQuick-Start GuideWORDCLOCKSYNC CARDINOUTINOUTSMPTEABMIX OUT CARDSPDIFSPEAKERSPHONESMIX OUTINOUTINLR12LRLROUTAES/EBUMIC/LINE 4 CARD5
16220 Wood-Red Road NE • Woodinville, WA 98072 • USAwww.mackie.com • [email protected] States and Canada: 800.898.3211 Europe, Asia, Central and
Part No. 0012120 Rev. 3 10/04©2004 LOUD Technologies Inc. All Rights Reserved.2X.200Digital X BusTable of ContentsIntroduction...
3Quick-Start GuideQuick-Start GuideIntroductionNote: As new software releases be-come available, they can be download-ed from the Mackie website by go
4X.200Digital X BusGetting StartedI/O Cards1. MIC/LINE 4 CARDThis card has four female XLR balanced micro-phone inputs, and four 1/4" TRS balance
5Quick-Start GuideQuick-Start Guide4. DIGITAL CARDThis card provides eight channels of digital I/O in two formats; TDIF on a DB25 connector and ADAT o
6X.200Digital X Bus8. SYNC CARDThe Sync card provides the digital word clock in and out on a pair of BNC connectors, and SMPTE time code in and out o
7Quick-Start GuideQuick-Start Guide15. Power SwitchThis one is self-explanatory. When the POWER switch is turned ON, power is supplied to the Digital
8X.200Digital X BusOperational BasicsAre you ready to get started? Let’s turn on the Digital X Bus and go over some of the general operational feature
9Quick-Start GuideQuick-Start Guide5. Make sure channel 1 has Input 1 assigned to it. Open the Assign window (Windows > Assign). Under the Input S
Comments to this Manuals