SA1521
oF 6 PAGES
5
O F 6 P A G E S
Active Speaker System
Active Speaker System
SA1521
SPEAKER
SA1521
oF 6 PAGES
6
O F 6 P A G E S
LOUD Technologies Inc. continually engages in research related to product improvement. New material,
production methods, and design renements are introduced into existing products without notice as a
routine expression of that philosophy. For this reason, any current LOUD Technologies product may differ
in some respect from its published description, but will always equal or exceed the original design speci-
cations unless otherwise stated. ©1999-2004 LOUD Technologies Inc. All rights reserved. “Mackie.” and
the “Running Man” gure are registered trademarks of LOUD Technologies Inc.
Part No. 0000788 Rev. D 09/04
www.mackie.com
16220 Wood-Red Road NE, Woodinville, WA 98072 USA
888.337.7404, fax 425.487.4337, sales@mackie.com
UK +44.1268.570.808, fax +44.1268.570.809, uk@mackie.com
ITALY +39.0522.354.111, fax +39.0522.332.294, italy@mackie.com
Active 2-Way Sound
Reinforcement Speaker System
SA1521
oF 6 PAGES
1
O F 6 P A G E S
SA1521
SPEAKER
Features
Active, High Output/Wide Dispersion
133 dB Peak SPL
Bi-amplication with 400 watts rms low-frequency
and 100 watts rms high-frequency power
Wide dispersion, ultra-low distortion high-
frequency horn
Complete electronic and component protection
circuitry
15-inch high efficiency, light mass woofer
State-of-the-art precision 1.75-inch titanium
compression driver with 3-slot, low distortion,
optimized geometry phase plug
Electronic equalization, time correction and
phase alignment
Low Frequency Dynamic Bass Protection, RMS
Limiting, Power Supply and Amplier Thermal
Protection
Professional trapezoidal enclosure design
Correctly weight-balanced with two comfort-
able side handles for easy carrying and set up
One top and one bottom handle for easy reposi-
tioning of speaker and built-in pole mount cup
on bottom
Applications
Live Applications
Playback Applications
Portable PA Systems
Corporate Events
SA1521
The SA1521 is an active 2-way sound reinforcement
speaker system designed for extreme accuracy, high out-
put, and smooth dispersion across the entire audio fre-
quency range. It integrates 500 watts of amplier power,
active control electronics, and precision components into a
speaker system with 100 dB sensitivity (1 watt @ 1 meter).
The resulting high resolution and clarity in the critical low-
mid and mid-range frequencies are unparalleled for a 15"
loaded, 2-way speaker system.
Several state of the art advancements in transducer
technology have been incorporated in the design of the
SA1521. The compression driver uses a new 1.75-inch
titanium diaphragm featuring a 3-slot, optimized geom-
etry phase plug. When coupled to the low-distortion, high-
output horn, the SA1521 provides uniform power response
and correct phase alignment characteristics at the cross-
over frequency. With the resulting 75° x 65° dispersion
pattern, the SA1521 provides very open, natural sound
reproduction at extreme output levels.
A 15-inch high-efciency woofer produces tight, punchy
bass. The woofer’s magnetic structure delivers an excep-
tional amount of magnetic force
and is responsible for the
system's high sensitivity and high efciency by providing
tight control over the cone's
movement. This tight control
over the woofer’s moving mass
results in unusually smooth
low-frequency response from
50Hz up to the mid-frequency
crossover point at 1300Hz.
The amplier for the compression driver incorporates a
Class AB topology, renowned for its clarity, warmth,
and
high-voltage output to generate extreme SPL levels. A
Class G design is used for the low-frequency amplier,
which features two power supplies for improved efciency
and more output power per pound.
A signal panel and a power panel are located on the
amplier assembly at the back of the cabinet, separated
by a large aluminum heatsink. The signal input panel con-
tains XLR connectors for line-level input and loop-through
connections, a level control, and four status LEDs for
Power ON, Signal Present, Limit, and Thermal functions.
The power switch and IEC AC connector are located on the
power panel.
The internal processor provides complete system
man-
agement of all electronic and acoustic functions. These
include an electronic active crossover, electronic phase
alignment, electronic time correction, electronic equaliza
tion,
and complete amplier and component protection.
To ensure long-term reliability, the ampliers are
mounted on a massive extruded heatsink, which is convec-
tion cooled and dramatically extends the life expectancy of
the heat-producing components.
(continued on page 2)
(20 pages)
(15 pages)
(16 pages)
(20 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals