Mackie SA1530Z User Manual

1SA1530z REPAIR MANUALSA1530z REPAIR MANUAL

10 33 A closeup of the high frequency driver is shown above. Four screws need to be removed from the driver using the 3mm allen wrench. 44 Keep the f

11 Mid Frequency Driver replacement: 11 Follow steps 1-6 of the high frequency driver replacement instructions, as the grill and horn assembly wil

12Mid Frequency Driver replacement continued: 55 Four screws and locking washers may be removed from the mid frequency driver using the phillips head

13 Amplifi er Assembly replacement: 11 Eighteen screws need to be removed from the amplifi er assembly using the phillips head screwdriver. Th

14Amplifi er assembly replacement continued: 44 Once the two cover plates are removed, two more screws need to be taken out in order to separate the am

15Amplifi er assembly replacement continued: 66 Closeups of the led PCB cable and connector are shown above. The black wire of the cable is closest to

16 88 Place the new amplifi er assembly (part #0013839-00) where the old one was. Follow the same steps as above, but backwards 7 to 1. Remove the seri

17 This page left blank intentionally

2These instructions are intended to help restore any ailing SA1530z Active Loudspeaker back to factory working conditions. They show how to remove and

3Led PCB replacement: 22 Keep the eight screws in a safe place. 44 Carefully remove the cable attached to the led PCB assembly. 11 Four screws need t

4Woofer replacement: 11 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the woofer.

5Woofer replacement continued: 66 The picture on the right shows what the SA1530z looks like with the grill and woofer removed . Place the new woofer

6 High Frequency Driver replacement: 11 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to

7High Frequency Driver replacement continued: 55 The positive (solid blue) and negative (blue and black) cables are still attached to the high frequen

8High Frequency Driver replacement continued: 88 Four screws and locking washers may be removed from the high frequency driver using the phillips head

9High Frequency Driver replacement continued:1111 Turning the high frequency driver over reveals the cover plate which needs to be removed using the