11
Here are some useful placement tips:
• Avoidplacingloudspeakersinthecornersofaroom.
This increases the low-frequency output and can cause
the sound to be muddy and indistinct.
• Avoidplacingloudspeakersagainstawall.This,too,
increases the low-frequency output, though not as
much as corner placement. However, if you do need to
reinforce the low frequencies, this is a good way to do it.
• Avoidplacingtheactivespeakersdirectlyona
hollowstageoor.Ahollowstagecanresonateat
certain frequencies, causing peaks and dips in the
frequency response of the room. It’s better to place the
active speakers on a sturdy table or tripod stands.
• Positiontheactivespeakerssothehigh-frequency
drivers are 2 to 4 feet above ear level for the audience
(make allowances for a standing/dancing in the aisles
audience). High frequencies are highly directional and
tend to be absorbed much easier than lower
frequencies.Byprovidingdirectline-of-sightfromthe
active speakers to the audience, you increase the
overall brightness and intelligibility of the sound
system.
• Highlyreverberantrooms,likemanygymnasiumsand
auditoriums, are a nightmare for sound system
intelligibility.Multiplereectionsoffthehardwalls,
ceiling,andoorplayhavocwiththesound.Depending
on the situation, you may be able to take some steps
tominimizethereections,suchasputting
carpetingontheoors,closingdraperiestocoverlarge
glass windows, or hanging tapestries or other materials
on the walls to absorb some of the sound.
However, in most cases, these remedies are not possible
or practical. So what do you do? Making the sound
system louder generally doesn’t work because the
reectionsbecomelouder,too.Thebestapproachisto
provide as much direct sound coverage to the audience
as possible. The farther away you are from the speaker,
themoreprominentwillbethereectedsound.
Use more speakers strategically placed so they are
closer to the back of the audience. If the distance
between the front and back speakers is more than
about 100 feet, you should use a delay processor to
time-align the sound. (Since sound travels about 1 foot
per millisecond, it takes about 1/10 of a second to travel
100 feet).
RIGGING
The SRM350v2 cabinets are fitted with four M5 insert
points on the top and bottom for installing an optional
hangingbracketthatallowsthespeakertobeown.
SRM350v2 Bracket Kit: Part No. 0016404
WARNING: Never attempt to suspend
the SRM350v2 active speakers by their
handles. If you want to suspend them,
use the hanging brackets only.
M5 inserts for mounting
optional hanging bracket
Bottom
Pole
Mount
Top
If you are hanging them in an
inaccessible place, such as over a lion’s
cage, make sure that you first complete
the sound check and set the SRM350v2
LEVEL correctly.
Comments to this Manuals