Mackie SRM350 V2 Owner's Manual download pdf (Page 17)

SRM350v2 SPECIFICATIONS

Enclosure Construction Features

Basic Design Asymmetrical Trapezoidal

Material Polypropylene

Finish  Blacktexturednish

Handles One on side, one on top

Grille Perforated metal with

weather-resistant coating

Line Input Power

Power Consumption 120 watts with musical program and

LIMIT LED blinking

US 120 VAC, 60 Hz

Recommended Amperage Service 2.5 amps

Europe 230 VAC, 50 Hz

Recommended Amperage Service 1.25 amps

Japan 100 VAC, 50/60 Hz

Recommended Amperage Service 3.0 amps

AC Connector 3-pin IEC 250 VAC

Note: The SRM350v2 does not support multiple voltage conﬁgurations.

Make sure the voltage rating for your particular model (as indicated

on the rear panel near the IEC socket) corresponds with your local AC

mains voltage.

Control System Functions

Electronic Crossover

Phase Alignment

Equalization

Parametric Equalization

Safety Features

Protection Low-frequencyDynamicBassProtection,

Power Supply, and Ampliﬁer Thermal Protection

Display LEDs Signal, Power, Limit

Physical Properties

Height 20.75 in / 527 mm

Width 13.10 in / 333 mm

Depth 12.25 in / 311 mm

Weight 26 lb / 11.8 kg

Mounting Methods

Optional hanging brackets for top and bottom of enclosure

(SRM350v2BracketKit:PartNo.0016404).

Never attempt to suspend the cabinet by its handles.

The SRM350v2 is pole-mountable via the built-in socket on the bottom of

thecabinet.Besurethepoleiscapableofsupportingtheweightofthe

SRM350v2.

Disclaimer

Since we are always striving to make our products better by incorpo-

rating new and improved materials, components, and manufacturing

methods, we reserve the right to change these speciﬁcations at any time

without notice.

“Mackie” and the “Running Man” ﬁgure are registered trademarks of

LOUD Technologies Inc.

All other brand names mentioned are trademarks or registered trade-

marks of their respective holders, and are hereby acknowledged.

System Speciﬁcations

Frequency Response (–3 dB)

83 Hz - 18.5 kHz

Frequency Range (–10 dB)

61 Hz - 22 kHz

Max SPL Long-Term @ 1m 118dB

Max SPL Peak @ 1m  121dB

Crossover Linkwitz-Riley

    24dB/octave@2400Hz

Audio

Input Type  BalancedDifferential

Input Impedance 94k ohms

Sensitivity (center detent)

  Line:  +4dBu

  Mic:  –36dBu

Maximum Input Level +22dBu

Acoustic Contour Equalization (peaking)

    +3dB@100Hz,

    +3dB@12kHz

Operating Temperature Range

–10ºC - 45ºC (14ºF - 113ºF)

Power Ampliﬁers

Low-Frequency Power Ampliﬁer

Rated Power 165 watts continuous*

Rated THD < 0.03%

Cooling Convection Extrusion

Design Class D

High-Frequency Power Ampliﬁer

Rated Power 30 watts continuous*

Rated THD < 0.03%

Cooling Convection Extrusion

Design   ClassAB

* Rated power is continuous rms wattage into transducer’s rated imped-

ance@1kHzfortheHFamplierand@100HzfortheLFamplier.

Transducer Speciﬁcations

Low-Frequency Transducer

Diameter 10 in / 250 mm

Voice Coil Diameter 2.0 in / 51 mm

Sensitivity (1W@1m) 96dB

Power Handling 250 watts rms, long-term

Frequency Range 61 Hz - 3 kHz

High-Frequency Transducer

Diaphragm Diameter 1.4 in/36 mm

Horn Exit Diameter 1 in/25.4 mm

Diaphragm Material Titanium

Sensitivity (1W@1m) 104dB

Nominal Impedance 16 ohms

Power Handling 75 watts rms, long-term

Frequency Range 1 kHz - 20 kHz

Horn Design

Horizontal Coverage

90º (1 kHz - 20 kHz)

Vertical Coverage

80º (1 kHz - 20 kHz)

Mouth Size

11.1 in x 6.1 in (283 mm x 154 mm)

1 2 ... 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Mackie SRM350 V2 Owner's Manual Page 17

Comments to this Manuals

Related products and manuals for Supplementary music equipment Mackie SRM350 V2